Description: Scout Trooper
Prefix: TB
Detachment:PathFinders
Context: Episode VI: Return of the Jedi

Trained to operate in all conditions, Scout Troopers are the Imperial Army's advance eyes in any situation. Sometimes called Biker Scouts for their primary method of transport, the Aratech 74-Z Speeder Bike, Scouts have been deployed in theaters ranging from the sub-freezing temperatures of Hoth to the temperate climates of the moon of Endor.

The following costume components are present and appear as described below.

• Gloss white or semi-gloss and may be lightly weathered.
• Lens is black in color and obscures wearer's eyes.
• Decals are screen accurate:
  • Helmet details created with decals on the originals may not be substituted with actual cutouts, i.e. above the snout area or the trapezoids in the back. If these areas are cut out on the helmet, they must be filled and covered with a decal.
• Snout greeblie is medium gray and the aerator portion is painted black.
• Snout recess is painted black.
• Bolts are either flat or have concave centers
• Helmet is true to the shape of original screen used helmet.
• Earholes are cut out -- mesh or paint is not acceptable:
  • Area behind earholes inside the helmet is blacked out, either with paint or tape. No interior white should show from the outside of the helmet when worn.
    

• Snout greeblie is screen-accurate:
  • it is an elongated plate with a rounded top, with a detail modeled after a Yamaha XS1100LG model motorcycle engine and sink aerator affixed to the bottom half.
  • “Sticker” snouts are not acceptable.
• Helmet bolts are Gray 3M bolts or other replicas with concave centers. (Visible bolt head diameter of 22mm).
• Optional: For the 'Back and Cap' style bucket constructions, fill the seam around the top of the dome so it is not visible.
• Optional: A white chin cup is present in the helmet.

• A balaclava is a black head sock/hood that is worn under the helmet and is used primarily to hide any view of the wearer’s skin and/or facial hair.
  

• The undersuit is a one or two-piece black textile suit, such as a military flight suit, motorcycle racing suit, industrial work clothing (Red Kap/Dickies), or similar suit modified appropriately.
• A Mandarin-style collar closure flap covers the neck area
• A suede or faux suede 'butt flap' attaches above the waist hidden by the cummerbund, rectangular in shape. The flap is slightly narrower than the width of the trooper and stops just above the bottom of the trooper's backside.
• Suede or faux suede thigh patches extend over the flight suit crotch and down the front finishing above the knee.
• Two black thigh straps, sewn in under the front and back of the thigh patch, circle the outside of the trooper’s leg.
  • Straps may be elastic or webbing.
• The suit is free of any visible labels, logos, zippers or pockets.
  

• Undersuit is tailored to the wearer.
• Thigh straps measure 2 inches wide (50mm).
• Thigh patches are real suede.
• Butt patch is real suede and resembles those seen on screen; size will vary slightly from scout to scout, but correct scale must be noted; no external visible stitching.

• Gloss white or semi-gloss and may be lightly weathered.
• Black elastic secures the armor around upper arm.
• These pieces are free of any adornment.
  

• Armor is secured around bicep with a 1/2 inch (12mm) black elastic strap.
• Bottom corners are rounded.
• Height of shoulder bell approximates screen used sources.
• Shoulder bells have appearance of being affixed to shoulder joins using black zip ties.

• Gloss white or semi-gloss and may be lightly weathered.
• Armor has a recessed area with a 't-bit' detail attached within.
• Black elastic is used to secure the armor around upper arm.
  

• Film-accurate 'T-bit' detail is mounted to armor.
• T-bit circle detail piece faces forward on each arm.
• Armor is secured around the arm with a 50mm ( 2') black elastic strap.

• Gloss white or semi-gloss and may be lightly weathered.
• Black elastic is used to secure the armor around forearm.
  

• Armor is secured around the arm with a 25mm ( 1') black elastic strap.

• Black leather and gauntlet length.
• Glove details include:
  • Black suede or faux suede patches on top of the middle finger, index finger and thumb.
  • Four tightly spaced ribs that span the knuckles.
• No labels/logos, clips, or external straps.
  

• Gauntlets fit wearer's arm snugly and do not flare.

• Made out of black, matte finish, heavy weight cotton fabric.
• Raglan sleeves are padded and ribbed.
• The sleeves end just below the bottom edge of the shoulder armor.
• Vest has a much wider neck opening than the flight suit.
• Secured at the back using 50mm (2') black hook and loop fastener.
• Closure is right-over-left.
• Optional: Codpiece may be attached to the front of the vest, with the codpiece strap going between the trooper's legs and connecting to the back of the vest.
  

• The vest is separate from the flight suit and cummerbund.
• Vest sleeves do not flare when worn with shoulder bells.
• Vest sleeves extend no further than 1.5 inches past the bottom edge of the shoulder bell.

• Gloss white or semi-gloss and may be lightly weathered.
• There is a recessed rectangular area present over the right breast that is painted a medium to dark gray.
• The chest and back armor join together over the shoulder and the gap covered with a strip of white fabric (the 'shoulder bridge').
• The sides of the chest armor attach to the back armor with white webbing.
  

• Shoulder bridge covers, covering the join between the front and back of the armor, are made of white cotton webbing or elastic.
  • Covers are between .5 inch and 1 inch wide.
• Side under arm chest/back straps are made from 40mm (1.5') white cotton webbing.
  • Optional: Straps may be off-white if using off-white pouches/drop box straps.
  • Optional: 40mm (1.5 inch) white elastic material is acceptable provided the color matches.
  • Optional: Shoulder bridges match color or pouches and drop box straps.

• Gloss white or semi-gloss and may be lightly weathered.
• The back armor has a center tank attached.
• The top of the tank is flat with a black tank topper detail attached.
  • Tank topper features the same greeblies as seen on the screen-used armor.
  • Tank topper has a white painted circle and red line detail.
  • The tank has a black stripe detail.
  • 'Rank bars' present on the right side of the tank can number between 0 to 6 stripes.
    

• Back and Tank are two separate parts.
• Only 1, 4 or 6 'rank bars' on tank are acceptable:
  • If tank has extra trapezoid detail on the center tank pin striping, only 4 thick rank bars are acceptable.
• Tank topper detail is secured to the top of the tank with a single silver colored 1/8th (3mm) rivet and visible washer.
• Tank has properly placed 1/8th inch pin striping.
• Tank has a single silver colored 1/8th (3mm) rivet placed in the bottom center of the tank.
• Optional: .5 inch elastic strap anchored to the tank rivets on top and bottom and loops around the inside of the back armor.

• Made from white fabric and may be lightly weathered.
• Closes in back with 50mm (2') hook and loop fastener.
• Closure is right-over-left.
• Extends from just under the chest armor down to the belt.
• Front of cummerbund has 5 ribs of equal width made of 6 vertical stitch lines, centered between the two fabric pouches.
  

• Made of smooth white cotton fabric
• Polished cotton or mercerized cotton is preferred. Canvas or duck cloth is not permitted.
• The cummerbund is separate from the flight suit and vest.
• Cummerbund ribs are 1 inch wide.
• No visible external edge stitching.

• Tapered codpiece has a sewn inverted curve detail.
• Black elastic strap connects codpiece between the legs to either the back of the cummerbund or the flak vest.
  

• Made of the same cotton fabric as the cummerbund
  • Polished cotton or mercerized cotton is preferred. Canvas or duck cloth is not permitted.
• Elastic strap is 50mm (2 inches).
• Codpiece and sewn curve conforms to shape pictured in the CRL or Costumes book.
• Codpiece does not bunch excessively around groin area.
• Codpiece attaches under the cummerbund either to the vest, the undersuit or the backside of the cummerbund. The codpiece is NOT sewn to the bottom edge of the cummerbund.

• White or off-white.
• Pouch flaps cover the entire top of the pouch, and then fold over the front of the pouch.
• Pouch flap bottom edge is even with bottom of pouch.
• Pouch flaps have one angled side and one straight side.
• Straight side of each pouch flap faces the ribs of the cummerbund.
  

• Made of canvas-type material (e.g., duck cloth)
• Pouch size is ideally 6 inches high, 5 inches wide and 2 inches deep.
• Bottom edge of the pouch flap is between 2 and 2.5 inches in width.
• Pouches have an attachment tab of at least 2 inches high to attach to the cummerbund.
• Pouch attachment tab is same width as the pouch (5 inches).
• Pouches have appearance of being affixed to the cummerbund by the attachment tabs as per the originals.
• Pouches sit approximately 1 inch from the outermost cummerbund rib on each side.

• Gloss white or semi-gloss and may be lightly weathered.
• The front and four 'boxes' of the belt are made of plastic.
• The remainder of the belt that fastens at the back of the waist is made from webbing material.
• There are only two (2) visible 1/8th (3mm) rivets on the belt: one on each side toward the back to connect the webbing closure material to the plastic belt
• Hanging from the sides of the belt are two plastic hip boxes ('drop boxes').
  • 4 black parachute buckles attach to the drop box straps, one on either side of the drop box.
  • Drop boxes connect to the belt via white textile straps.
    • If using off-white cummerbund pouches and side straps, the drop box straps are also off-white.
      

• Belt is worn on the waist and not on the hips.
• Belt has the appearance of being a one-piece construction. Any joins or seams are filled.
• 2 inch (50mm) nylon or polypropylene webbing is attached to the belt in the back with one (1) 1/8th (3mm)silver rivet on each side.
• Drop boxes hang approximately 1 inch from the belt.
• Dropbox straps are 1.5 inches (38mm) wide and made of white cotton webbing.
• If pouches are off-white, dropbox straps must be dyed to match.
• Parachute buckles are not functional. In the film, the straps looped behind them.

• Thermal detonator box with a short gray hose that protrudes evenly from both ends.
  • Hose is either corrugated or wire-wrapped.
  • Hose is painted medium to light gray.
  • Hose is capped off on both sides with two white, circular caps.
• On either end of hose is a black drill-style belt clip used to attach detonator to main belt.
• The correct thermal detonator greeblies are attached to the box.
  • The rectangular thermal detonator greeblie, fixed on the left side of the detonator, is the same used for the rebel Endor trooper rank badge.
  • The prongs on the rectangular greeblie point up.
  • On the right side is the same round greeblie as used on the Scout tank topper.
• Detonator box is gloss white or semi-gloss and may be lightly weathered.
  

• Thermal Detonator end caps are concave and not flat.

• Gloss white or semi-gloss and may be lightly weathered.
• Black elastic is used to secure the armor around the leg.
  

• Knee armor has two elastic straps:
  • The upper strap is 12mm (1/2 inch) wide and is riveted to the top sides of the knee armor with two (2) 1/8th (3mm) silver-colored rivets.
  • The lower strap may be 12mm (1/2 inch) or 20mm (3/4 inch) wide and passes through the lower sides of the knee armor.

• White and may be lightly weathered.
• The soles of the boot are tan.
• A 'dog bone' shaped strap covers the bridge of the foot.
• Dog bones have double stitching along the rounded edges as seen in the film.
• The boots are secured up the back using 25mm (1 inch) white hook and loop fastener.
• The calf of the boot rises to just slightly underneath the bottom of the knee armor.
• Left boot closure is left-over-right.
• Right boot closure is right-over-left.
  

• The boots have slots cut into the heels and toes as seen in the film.
• The boot sole is a single color with no visible stitching.
• Boot stitching is white.
• Boots that are constructed too wrinkled (i.e not stretched/fitted correctly prior to gluing) or poor in appearance will be refused.

• Gloss white or semi-gloss and may be lightly weathered.
• Attached to the outside of the right boot with 1/8th (3mm) silver-colored rivets.
• The blaster pistol fits into the holster.
  

• Front of holster has five (5) cut out vents.

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.

• Flat or semi-gloss black.
• Blaster does not have any visible trigger.
• Blaster is lightly weathered.
  

• Scope eyepiece has stepped circular grooves like the original.
• Scope has no actual lens.
• No decals representing cross hairs or similar.
• No drilled barrels. The screen used ones did not have drilled barrels.

Manufactured by BlasTech Industries, the DLT-19 heavy blaster rifle is much more powerful with a much greater range than the E-11 blaster. Because of its powerful, long range capabilities, this rifle is commonly used on Imperial controlled planets with large, clear, open areas.

• Based on a real or replica MG-34 machine gun.
• Flat or semi-gloss black.
• Blaster is lightly weathered.
  

• T-tracks present on the barrel.
• Ejection port cover added.
• Small disk on left side.

Manufactured by BlasTech Industries, the DLT-19x targeting blaster was a blaster rifle, and a variation of the DLT-19 heavy blaster rifle. Unlike the DLT-19, the DLT-19x released all of its power in one shot before it would need to cool down. The DLT-19x was a very powerful weapon, and could take down most enemies in one shot. The weapon had a scope which could be zoomed in farther than most scopes. The DLT-19x was a weapon of choice for many snipers, and was very effective.

• Based on a real or replica MG-34 machine gun.
• Real or prop scope.
• Flat or semi-gloss black.
• Blaster is lightly weathered.
  

• T-tracks present on the barrel.
• Ejection port cover added.
• Real or prop SinglePoint scope with modifications.
• Small disk on left side.
• No bipod attached to barrel.

The BlasTech DLT-20A blaster rifle was a long-barreled rifle (sometimes referred to as a 'longblaster') with a top-mounted rangefinder and electronic sight. It had automatic and semiautomatic settings and a rate of fire very close to that of the DC-15A blaster rifle and other longblasters. This was one of the few blaster models produced with a magnatomic adhesion grip, keeping the weapon firmly in the wielder's grip and making him or her more difficult to disarm. With additional collimating rings and longer conduits of galven circuitry, these rifles have improved consistency in their shots.

• Based on a real or replica STG-44 machine gun, with parts from the Browning M1919.
  • Real or prop scope.
  • Flat or semi-gloss black.
  • Blaster is lightly weathered
    

• Black smooth, shiny material (nylon, polyester, leather, etc.)
• Cylindrical-shaped with circular ends.
• Approximately 20 inches long and 8 inches wide.
• Black fabric straps attach to the bag with small metallic silver discs (rivets, Chicago screws, etc.)
• One black tri-glide buckle on each strap.
• Stuffed so that the shape of the bag is apparent.
  

Description: Snow Scout
Prefix: TS
Detachment:Blizzard Force
Context: Star Wars.

When deployed to frozen, hostile environments, Scouts are equipped with a hybrid of cold weather armor. This armor combines the survival gear of the Snowtrooper with the needed equipment to carry out the scouting mission.
'

For 501st membership only the requirements in black need to be met.

The following costume components are present and appear as described below.

• ROTJ Scout Trooper Style helmet
• Lens is black in color and obscures wearer’s eyes
• Snout greeblie is painted grey and aerator portion is painted black
• Inner edge of snout recess is painted black
• Licensed helmets are acceptable with modifications-
  • Remove manufacturer logos
  • Replace stock lens
  • Replace inaccurate fish hook symbol with correct square shaped symbol
  • Replace stock bolts and with correct flat bolt head, or real 3M bolt, painted either grey or white
• Fan-made helmets are acceptable as long as they remain true to shape of original screen accurate helmet
  

• White balaclava worn under the helmet
  • The balaclava is a white head sock/hood that is worn under the helmet and is used primarily to hide any view of the wearer's skin and/or facial hair
    

• Flight suit is of the same design as the ROTJ Biker Scout, the differences only being the colors
• The under-suit is a one or two-piece white textile suit, such as military flight-suits, motorcycle racing suits, industrial work clothing (Dickies) or similar suit modified appropriately
• Suit includes a off-white (oatmeal) suede or faux suede rear flap
  • Flap is rectangle in shape
  • Attachment point is above the waist and hidden by the cummerbund
  • The flap is slightly narrower than the width of the trooper and stops slightly higher than the bottom of the troopers behind
• Off-white (oatmeal) suede or faux suede thigh patches are present
  • Patches extend over the crotch of the flight suit and down the front, finishing above the knee armor
  • The thigh patches are secured by 50mm (2') white elastic, sewn in under the front and back of the thigh patch
• Flight suit does not have any visible labels, logos or zippers (including built in flight suit pockets)
  

• Vest is of the same design as the ROTJ Biker Scout, the differences only being the color
• Vest is constructed from matte white, heavy weight cotton fabric
• Sleeves are padded and contain ribbing similar to the front of the cummerbund. The sleeves extend farther than the bottom edge of the shoulder armor, but end above the elbow
• Vest has a much wider neck opening than the flight suit
• Secured at the back using white, 50mm (2') hook and loop fastener
  

• Cummerbund is constructed from matte white, heavy weight cotton or nylon fabric
• Closes in back using white, 50mm (2') hook and loop fastener
• Cummerbund starts just under the chest armor and extends down to the waist
• There is no gap between the belt and cummerbund
• Cummerbund has a lower tapered cod area with inverted curve stitched detail
  • This section is made from the same heavy weight cotton or nylon material
  • This tapered section sits between the legs and connects to the back of the cummerbund by a 50mm (2') white elastic strap
• Cummerbund has 6 or 7 vertical stitch lines producing 5 or 6 raised ribs of equal width
  • Ribs are stitched into the front and center of the cummerbund
    

• Shoulders match visual reference
  • See the Snowtrooper Shoulder Armor detail page for more information
• Shoulders have (7) trapezoid shaped box details along the bottom
• Rim is raised the entirety of the shoulder bell, merging into a rounded detail mid-way on both sides
• Shoulders are attached directly to the vest via personal discretion. No visible attachment method is present unless it is sewn
  • OPTIONAL: The armor is (or appears to be) sewn onto the vest, via three spaced areas along the upper edge
    

• Made of plastic or fiberglass, each forearm is different in details
  • See the Snowtrooper Forearm Armor detail page for more information
• Placement is not consistent; they are interchangeable
• Forearms have an unadorned/smooth curved cuff
  • Made of matching material as the main body
  • Not a soft cloth material
• Wrist cuff appears attached to forearm with no visible spatial gaps. Appearance of overlapping plastic is acceptable
  • It is attached to the outsides of the main forearm, not the inside
• The addition of a strap to further secure the forearm piece is allowed, but is not screen accurate with regards to the ESB Snowtrooper. If a strap is added, it should be white in color, and the smallest width of elastic possible
  • Optional: Split cuff is allowed per film reference, in that the wearer's INSIDE cuff is NOT visibly attached to the forearm and the wearer's OUTSIDE cuff is visibly attached to the forearm
    

• White/off-white (ivory) gloves. Gardening gloves are movie accurate such as Wells Lamont or similar design of glove
• Gloves have elastic wrist/cuff
  • No buttons or snaps
  • Cuff excess is tucked into the forearm/sleeve
• Hand plates are mirrored design (both are different for each hand)
  • Hand plates are in the same style as ESB TK hand plates
• The armor is (or appears to be) sewn onto the gloves, with stitching on four corners of the hand plates
  

• Chest Armor matches visual references
  • See the Snowtrooper Chest Armor detail page for more information
• Accurate shape/design to front of chest
• Outer rim has a continuous trim edge
  • As well as a raised trim on the recessed box, and a raised trim on the recessed box
• Shoulder straps are Stormtrooper style and secured to the chest armor by one Chicago screw/Binding Post on the front, centered onto the first raised rectangular 'step' detail
• Rear of shoulder strap has same detail, securing to the back armor in the same fashion
• The front recessed box includes several detail pieces
  • One T-shaped slider knob greeblie is silver and matches the provided image
  • Left of the slider knob is a silver/metal plate
  • Two squares below metal plate detail are matching grey color
  • Rectangular black detail added on left portion of metal plate
  • Two thin-lined boxes that sit over one another on right side
  • Right of the slider knob is light grey
• Right-hand side of chest has an elongated rectangular strip of metal with each end split-riveted (alternative are saddler's rivets) to the chest armor.

Rivets are in-line/centered on either end above the LED covers

• Metal strip has (3) red rectangular LED light covers/caps, evenly spaced and retains light diffusing plastic insert
• Left-hand side of chest has two oblong shaped details which protrude outwards
  • They are offset and staggered from one another, one being more forward. The forward most center is a light grey
  • The rear oblong face is dark red
  • Outside of the rear oblong is light grey
  • A clear separation between the red and grey is distinguishable
• Light grey box detail painted on the lower-right hand corner of chest armor
• Mid-chest/Rib strapping to backplate
  • made of nylon or poly webbing with no distinguishable stitching at least 30mm wide. Elastic is Authorized
  • No noticeable stitching is present
  • Strapping from backplate is connected to chest armor via a metal wire-like, squared off 'U'-shaped fixture. Fixture is secured via two rivets (Split or saddlers OR any flat-cap style), one over the other, and is attached to the inside of chest armor, protruding outwards
  • Hardware is silver or a rusted brown
• Recommended paints: Humbrol #5 Dark AD Grey, Humbrol #21 Gloss Black and Humbrol #19 Bright Red
  

• ROTJ Scout Trooper style back armor
• Gloss or semi-gloss white
• The back plate has a tank attached
• The top of the tank is flat with a detail piece painted black
  • Detail piece includes the same greeblies as that of the standard Scout Trooper, including white painted circle and red line detail
• Tank has a black stripe detail on surface
• Tank may have additional 'rank indicators' present on the right side
  • These indicators can number anywhere from 0 to 6 stripes
    

• Gloss or semi-gloss white
• The front section and two 'boxes' of the belt are made out of plastic
• The rest of the belt, which fastens at the back of the waist, is made from a textile material
  • 2' nylon webbing is preferable
• Hanging from the sides of the belt are hip pouches
• Pouches are made from white or off-white material (same as the standard Scout cummerbund pouches)
• Pouches are connected to the belt by textile straps, with a buckle in the center of the strap
  • Buckles are parachute-style and are in proportion with straps
  • White buckles (or buckles covered in white material) are highly encouraged
  • Black buckles are acceptable

OPTIONAL

• The plastic sections of the belt are constructed from a single piece or have the appearance of being a single piece and is attached to a nylon 50mm (2') webbing belt
• Belt is secured with a single rivet on each end
• Closure is secured at the rear with hook and loop fastener
  

• Consist of a gray cylinder 2 to 2.5' in diameter with indented white end caps and a white control panel, with details closest to the right-side end cap when worn
• Detonator is centered on the back of belt and is secured by two metal clips when worn
  • Clips are secured to the detonator by 2 flat head or dome head metal screws painted black (two per clip)
  • Clips are positioned with little or no gap between the clips and end caps
    

• ROTJ Scout Trooper style knee armor
• White elastic is used to secure the armor around the leg

OPTIONAL STYLE

• Each knee piece is secured with two white elastic straps
  • One, 25mm (1') piece which passes through the lower section
  • One, 12mm (1/2') piece which is riveted to each side of the upper section
    

• Canadian Mukluk boots with or without the liner
  • NOTE: Mukluks sizes are larger than standard sizes. Recommended to get at least 2-3 sizes smaller than your regular shoe size
• Three- 1'- 1 1/4' wide straps, made from either nylon, cotton webbing or poly webbing material, are added to the upper portion of the boots
• Straps are held in place with a brass/silver Chicago screw/Binding Post along the rear-center 'spine' of the boot. (one per strap)
  • Minimal stitching is authorized if white velcro sewn onto strap. However, this stitching appears as a thin rectangular box with no cross stitching; appears as just an outline
  • White thread is used for this stitching
• Orientation of overlapping strap is interchangeable; acceptable to have them both pointing the same direction (to the left or to the right)
  • Optional: If you wish to retain the D-rings, laces must be present
    

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.

• Made from white or off-white cotton fabric, matching color of vest
• Horizontal rows, evenly spaced
• Closure is secured vertically down center of backside with hook and loop fastener
• Any excess material, on bottom of neck seal, is tucked into the flight suit
  

• Flat or semi-gloss black
• Blaster does not have any visible trigger, labels or logos
• Blaster may be lightly weathered

OPTIONAL

• The scope has lens discs cut into the scope for a more realistic appearance
• No decals representing cross hairs or similar
  

• Based on a real or replica Sterling sub-machine gun, scratch-built, or a modified commercial toy Stormtrooper blaster
• Folding stock (does not need to function)
• No ammo counter shall be present
• Correct style scope
• No power cylinders on the magazine housing
• Scratch-built or cast blasters shall have a total of 6 T-tracks on blaster (leaving the lowest row on the magazine housing side uncovered)
• If using the Hasbro E11 toy blaster, it is modified to have the correct number of T-tracks (6 total), with a lower row of open vent holes on the magazine housing side
• This is accomplished by covering the pre-existing rows of holes with T-tracks, then grinding off the lower integrated T-track on the magazine housing side, and drilling a new row of holes in its place
• Two greeblies on the left rear area
• Three studs on the right rear area
• Add two scope block greeblies
• Remove front bayonet muzzle disk
• Remove magazine housing parts
• Remove D-Ring mount
• Swoosh trim on right side above the pistol grip
  

Manufactured by BlasTech Industries, the DLT-19 heavy blaster rifle is much more powerful with a much greater range than the E-11 blaster. Because of its powerful, long range capabilities, this rifle is commonly used on Imperial controlled planets with large, clear, open areas

• Based on a real or replica MG-34 machine gun
  

The BlasTech DLT-20A blaster rifle was a long-barreled rifle (sometimes referred to as a 'longblaster') with a top-mounted rangefinder and electronic sight. It had automatic and semiautomatic settings and a rate of fire very close to that of the DC-15A blaster rifle and other longblasters. This was one of the few blaster models produced with a magnatomic adhesion grip, keeping the weapon firmly in the wielder's grip and making him or her more difficult to disarm. With additional collimating rings and longer conduits of galven circuitry, these rifles have improved consistency in their shots

• Based on a real or replica STG-44 machine gun, with parts from the Browning M1919
  • Real or prop scope
  • Flat or semi-gloss black
  • Blaster is lightly weathered